How To Use A Gas Starter Wood Burning Fireplace. Fuel your fireplace properly to avoid safety hazards, especially when burning wood. The gas should enter the chamber and the pilot light should light up.

How To Use A Gas Starter Wood Burning FireplaceHow To Use A Gas Starter Wood Burning Fireplace
How To Use A Gas Starter Wood Burning Fireplace inspire from indigenous2015.org

What you have is a masonry fireplace with a set of gas logs stuck in them. Then you can burn wood in your fireplace again. Once a wood fire has got going a gas starter can be turned off and gas therefore isn’t the primary source of fuel for a gas starter fireplace.

Log Lighters Are Very Safe To Use In A Wood Burning Fireplace.

What you have is a masonry fireplace with a set of gas logs stuck in them. Fuel your fireplace properly to avoid safety hazards, especially when burning wood. A gas line can be installed in this fireplace style, which allows you to connect a log lighter to the hard pipe gas line that enters your firebox.

Light The Gas Starter Using Your Match Or Lighter Immediately.

Keep it loose with plenty of air gaps. Once a wood fire has got going a gas starter can be turned off and gas therefore isn’t the primary source of fuel for a gas starter fireplace. Once the burner is lit, insert the key and turn it.

Do Not Use Solid Fuels If They Are Labeled For Gas Appliances Only.

Use only an appropriate type of fuel for your fireplace or stove as described in the owner’s manual or on its label. You can then utilize your starter pipe to ignite your logs. Place kindling below the logs.

Stack Your Wood On A Grate Just Like You Would Normally.

Use the gas key to turn the gas valve a quarter turn. Simply so, how do you start a wood burning fireplace with a gas starter? The biggest benefit to a gas starter is you will have less creosote and a healthier start to your fire.

The Gas Should Enter The Chamber And The Pilot Light Should Light Up.

As gas starter fireplaces are designed to burn wood but simply use gas to help start the fire, it can be considered fine to burn wood in a gas starter fireplace. Now open the gas valve and strike a match to light the bar. You have to remove the gas logs and its gas burner pipe entirely and replace it with a real gas starter pipe that you can purchase from a stove shop or a hardware store.